infrastructure/README.md

# Tomter Vel — infrastructure

Everything the vel's own site needs on one host, as containers: Caddy
for TLS, NATS with JetStream for the records, Kanidm for who is who,
and portal, the site itself. The content (pages, forms, desks) lives
in [tomtervel/questions](https://prosjekt.klingenbergbygg.no/tomtervel/questions)
and is fetched from there; this repo owns the host.

```
Internet ──► Caddy (Let's Encrypt)
               ├── PORTAL_HOST ──► portal:3000 ──► NATS (records) + Kanidm (login)
               └── ID_HOST ─────► kanidm:8443 (internal TLS)
```

Today the vel's draft site runs on Klingenberg Bygg's host as
vel.klingenbergbygg.no, sharing that host's Kanidm and NATS. This repo
is the same site on a host of the vel's own, with a Kanidm of its own,
so nothing about the vel's members or records depends on anyone else.

## First start

On a fresh Linux host with podman + podman-compose and openssl (run rootful,
i.e. as root, so Caddy can bind 80/443 and Kanidm sees a stable source IP):

```sh
git clone https://prosjekt.klingenbergbygg.no/tomtervel/infrastructure /srv/tomtervel/infrastructure
cd /srv/tomtervel/infrastructure
cp .env.example .env      # set PORTAL_HOST and ID_HOST; DNS must point here
sudo sh bootstrap.sh      # renders configs, makes the internal cert, starts, recovers Kanidm admin
sh kanidm-setup.sh        # logs in, creates the portal client and desk groups, restarts portal
```

`bootstrap.sh` prints the `admin` and `idm_admin` passwords once;
write them down. After `kanidm-setup.sh`, https://PORTAL_HOST serves the
site and https://ID_HOST is the login.

## Running on kasse (behind the host Caddy)

The vel keeps its **own** Kanidm and NATS here so it can later lift onto a host
of its own unchanged — on kasse it just runs in isolation, fronted by kasse's
existing host Caddy (which owns 80/443). So the bundled Caddy stays off (it's
behind `profiles: [edge]`); run the default `podman compose up -d --build`.
The services publish loopback-only ports for the host Caddy to reach:

- portal → `127.0.0.1:3050`
- kanidm → `127.0.0.1:8443` (internal self-signed TLS)
- nats   → `127.0.0.1:4223` (kasse's shared platform NATS owns 4222)

Add two host-Caddy site blocks in `/etc/caddy/conf.d/`, using the vel's `.env`
hosts (`vel.klingenbergbygg.no → :3050` already exists):

```
<PORTAL_HOST> {
	reverse_proxy localhost:3050
}
<ID_HOST> {
	reverse_proxy https://localhost:8443 {
		transport http { tls_insecure_skip_verify }
	}
}
```

Then `sudo systemctl reload caddy`, point the content repo's `lint-and-reload`
reload step at `nats://127.0.0.1:4223`, and retire the old systemd portal:
`sudo systemctl disable --now app@tomtervel-portal`.

## People and desks

Each group in the content (`qualifies:` under `questions/`) is a
Kanidm group `tomtervel_<group>`, all members of `tomtervel_members`.
Someone in `tomtervel_styret` logs in and sees the board's desk.

```sh
kanidm -D idm_admin -H https://ID_HOST person create kari "Kari Lien"
kanidm -D idm_admin -H https://ID_HOST person update kari --mail kari@example.no
kanidm -D idm_admin -H https://ID_HOST person credential create-reset-token kari
kanidm -D idm_admin -H https://ID_HOST group add-members tomtervel_styret kari
```

Membership is read at login; someone added while logged in logs out
and in again.

## Content changes

A push to tomtervel/questions is linted on push and tells the portal
to reload over NATS. That reload reaches the host it runs on: today
Klingenberg Bygg's. On this host the runner is a **host service**
(`pacman -S gitea-runner`, registered against prosjekt.klingenbergbygg.no) —
not an in-compose container — so it reaches NATS on the published
`127.0.0.1:4222`. Give the content repo's `lint-and-reload.yml` a reload job
whose `runs-on` matches that runner's host label, running
`nats --server nats://portal:$NATS_PASSWORD@127.0.0.1:4222 pub portal.content.reload ""`.
Until then, `podman compose restart portal` picks up new content.

## Upgrading portal

Bump `PORTAL_RELEASE` in `.env` (a tag of uhhm/portal) and
`podman compose up -d --build portal`. Keep `IRIS_RELEASE` in the
content repo's workflow matched to it.

## Backups

- Kanidm writes a nightly backup into its volume (`/data/backups`,
  seven kept); copy that directory off the host.
- NATS JetStream data is the `nats_data` volume: every record ever
  submitted and every state change. Snapshot the volume.
- Caddy's certificates regenerate; nothing to keep.

## What is not here

Mail (a person's reset link is a token you hand them), monitoring, and
the vel's current website at tomtervel.no, which stays where it is
until the vel points the apex at PORTAL_HOST.

## Mail

Portal decides what to send - a `mail:` on a state in the content, or an
invite - and publishes it on this stack's NATS. `gdo` is what hands it to
a mail server, and it runs here, in the vel's own stack, so the vel's mail
leaves on the vel's own terms.

It has no mail server of its own. It relays through the host's, which on
kasse is Klingenberg Bygg's postfix on port 25, reached from the container
as `host.containers.internal`. That is the one thing in this stack the vel
borrows, and the one thing that changes if the vel ever moves to a host of
its own: point `SMTP_HOST` at whatever that host runs.

`site.yaml` in the content repo needs a `mail.from`, or portal has nothing
to send from and says so in its log.

Replies are not read yet: `JMAP_URL`, `JMAP_TOKEN` and `MAIL_REPLY_DOMAIN`
turn a reply into a note on the record it answers, and none of them are set
here.